Ethernet Config Registers
Name Start Address Type Access
ETHERNET_IP_DEFAULT 49150 UINT32 R/W
ETHERNET_SUBNET_DEFAULT 49152 UINT32 R/W
ETHERNET_GATEWAY_DEFAULT 49154 UINT32 R/W
ETHERNET_DNS_DEFAULT 49156 UINT32 R/W
ETHERNET_ALTDNS_DEFAULT 49158 UINT32 R/W
ETHERNET_DHCP_ENABLE_DEFAULT 49160 UINT16 R/W
ETHERNET_APPLY_SETTINGS 49190 UINT32 W
ETHERNET_IP_DEFAULT
- Address: 49150
The IP address of wired Ethernet after a power-cycle to the device.
  • Data type: UINT32  (type index = 1)
  • Readable and writable
ETHERNET_SUBNET_DEFAULT
- Address: 49152
The subnet of wired Ethernet after a power-cycle to the device.
  • Data type: UINT32  (type index = 1)
  • Readable and writable
ETHERNET_GATEWAY_DEFAULT
- Address: 49154
The gateway of wired Ethernet after a power-cycle to the device.
  • Data type: UINT32  (type index = 1)
  • Readable and writable
ETHERNET_DNS_DEFAULT
- Address: 49156
The DNS of wired Ethernet after a power-cycle to the device.
  • Data type: UINT32  (type index = 1)
  • Readable and writable
ETHERNET_ALTDNS_DEFAULT
- Address: 49158
The Alt DNS of wired Ethernet after a power-cycle to the device.
  • Data type: UINT32  (type index = 1)
  • Readable and writable
ETHERNET_DHCP_ENABLE_DEFAULT
- Address: 49160
The Enabled/Disabled state of Ethernet DHCP after a power-cycle to the device.
  • Data type: UINT16  (type index = 0)
  • Readable and writable
ETHERNET_APPLY_SETTINGS
- Address: 49190
Writing 1 to this register power-cycles Ethernet. It tells the device to waits 1s before turning off Ethernet and then 500ms before turning it back on.
  • Data type: UINT32  (type index = 1)
  • Write-only
  • T8:
  • T7:
  • T4: